The bottom player has a two-leg high clinch with the opponent facing them. The change removes the second-leg reinforcement; it does not convert a rear ride or a leg entanglement into guard.

Maintain the original high leg and supporting hand before opening the second leg. Use the hip angle to support the raised knee without pulling on the foot. Lower the second leg deliberately while keeping the upper-body connection.

Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled. Recognize that the opponent may still have both arms inside and can rebuild posture. Recover ordinary guard if the first high-leg connection no longer holds safely.

Move through available space with a stable base. Stop and release any trapped neck, shoulder or knee before changing direction; do not force a roll or stack to preserve the route.

Open the reinforcing leg while retaining the first high-leg posture control. If an overhook around the cleared arm is available, keep it connected to the knee during the change; the resulting Mission Control can support a later submission entry only after its own arm or neck controls are established.

From Position: Crackhead Control (Bottom)

Film Study

Watch Crackhead Control to Mission Control (Attacker) in action — curated instructionals

Mission Control to Zombie to Invisible Collar · 1:48 · Watch on YouTube

Prison Guard breakdown · 0:59 · Watch on YouTube

Rubber guard · 1:51 · Watch on YouTube

Key Attacking Principles

What are the key principles for executing Crackhead Control to Mission Control?

  • Check the first shin connection: Maintain the original high leg and supporting hand before opening the second leg.
  • Keep the hips close: Use the hip angle to support the raised knee without pulling on the foot.
  • Open the reinforcing leg: Lower the second leg deliberately while keeping the upper-body connection.
  • Place a useful lower frame: Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled.
  • Track the inside arms: Recognize that the opponent may still have both arms inside and can rebuild posture.
  • Reset if posture is lost: Recover ordinary guard if the first high-leg connection no longer holds safely.

Prerequisites

What do you need before attempting Crackhead Control to Mission Control?

  • The bottom player has a two-leg high clinch with the opponent facing them.
  • Maintain the original high leg and supporting hand before opening the second leg.
  • Use the hip angle to support the raised knee without pulling on the foot.
  • The change removes the second-leg reinforcement; it does not convert a rear ride or a leg entanglement into guard.

Execution Steps

How do you execute Crackhead Control to Mission Control step by step?

  1. Check the first shin connection: Maintain the original high leg and supporting hand before opening the second leg.
  2. Keep the hips close: Use the hip angle to support the raised knee without pulling on the foot.
  3. Open the reinforcing leg: Lower the second leg deliberately while keeping the upper-body connection.
  4. Place a useful lower frame: Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled.
  5. Track the inside arms: Recognize that the opponent may still have both arms inside and can rebuild posture.
  6. Reset if posture is lost: Recover ordinary guard if the first high-leg connection no longer holds safely.

Possible Outcomes

ResultPositionProbability
SuccessMission Control65%
FailureCrackhead Control20%
CounterClosed Guard15%

Opponent Counters

How might your opponent counter Crackhead Control to Mission Control?

  • Avoid extending an arm between the high legs where it can be isolated. (Effectiveness: High) - Your Response: Re-check the prerequisite before continuing. Maintain the original high leg and supporting hand before opening the second leg. → Leads to Crackhead Control
  • A second leg climbing behind your head increases the posture-control problem. (Effectiveness: Medium) - Your Response: Re-check the prerequisite before continuing. Use the hip angle to support the raised knee without pulling on the foot. → Leads to Closed Guard
  • Build a balanced base and an early hip frame before the high clinch closes. (Effectiveness: Medium) - Your Response: Re-check the prerequisite before continuing. Lower the second leg deliberately while keeping the upper-body connection. → Leads to Closed Guard
  • Undo the high-leg connection before attempting to stand tall or extract an arm. (Effectiveness: High) - Your Response: Re-check the prerequisite before continuing. Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled. → Leads to Closed Guard

Common Attacking Mistakes

What mistakes should you avoid when executing Crackhead Control to Mission Control?

1. Skipping the checkpoint: check the first shin connection

  • Consequence: The intended control is not established before the next movement; the missing requirement is: Maintain the original high leg and supporting hand before opening the second leg.
  • Correction: Maintain the original high leg and supporting hand before opening the second leg.

2. Skipping the checkpoint: keep the hips close

  • Consequence: The intended control is not established before the next movement; the missing requirement is: Use the hip angle to support the raised knee without pulling on the foot.
  • Correction: Use the hip angle to support the raised knee without pulling on the foot.

3. Skipping the checkpoint: open the reinforcing leg

  • Consequence: The intended control is not established before the next movement; the missing requirement is: Lower the second leg deliberately while keeping the upper-body connection.
  • Correction: Lower the second leg deliberately while keeping the upper-body connection.

4. Skipping the checkpoint: place a useful lower frame

  • Consequence: The intended control is not established before the next movement; the missing requirement is: Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled.
  • Correction: Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled.

5. Skipping the checkpoint: track the inside arms

  • Consequence: The intended control is not established before the next movement; the missing requirement is: Recognize that the opponent may still have both arms inside and can rebuild posture.
  • Correction: Recognize that the opponent may still have both arms inside and can rebuild posture.

Training Progressions

How do you train Crackhead Control to Mission Control (Attacker)?

Phase 1 - Identify the configuration Work cooperatively on check the first shin connection. Maintain the original high leg and supporting hand before opening the second leg. Pause at the checkpoint, check both partners’ comfort, and reset before adding resistance.

Phase 2 - Rehearse the connection Work cooperatively on keep the hips close. Use the hip angle to support the raised knee without pulling on the foot. Pause at the checkpoint, check both partners’ comfort, and reset before adding resistance.

Phase 3 - Add an early response Work cooperatively on open the reinforcing leg. Lower the second leg deliberately while keeping the upper-body connection. Pause at the checkpoint, check both partners’ comfort, and reset before adding resistance.

Phase 4 - Link only verified checkpoints Work cooperatively on place a useful lower frame. Return the free foot or leg to a comfortable guard frame instead of leaving both hips uncontrolled. Pause at the checkpoint, check both partners’ comfort, and reset before adding resistance.

Safety Considerations

What are the safety concerns for Crackhead Control to Mission Control?

Move through available space with a stable base. Stop and release any trapped neck, shoulder or knee before changing direction; do not force a roll or stack to preserve the route.