An omoplata from Crackhead Control requires releasing the reinforcing clinch, isolating one shoulder with the leg, and establishing finishing control before applying pressure.

Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated. Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry.

Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled. Establish the body angle and hip control that stop the opponent from freely following the shoulder movement. Take up slack without bouncing or forcing the knee; stop before the shoulder is driven beyond its available range. Stop at a tap or verbal signal, remove the joint pressure, and release the leg clamp so the arm can move freely.

Practice cooperatively with controlled movement. Stop at any tap, verbal signal, or distress; release all joint or neck pressure before changing direction. Do not force a trapped knee, shoulder, or neck to preserve the route.

From Position: Crackhead Control (Bottom)

Film Study

Watch Omoplata from Crackhead Control (Attacker) in action — curated instructionals

Mission Control to Omo Plata · 0:48 · Watch on YouTube

Key Attacking Principles

What are the key principles for executing Omoplata from Crackhead Control?

  • Two legs controlling upper-body posture: Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated.
  • Open the second high-leg connection: Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry.
  • One upper arm caught by the leg: Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled.
  • Torso angle and opponent hip control: Establish the body angle and hip control that stop the opponent from freely following the shoulder movement.
  • Small controlled pressure after isolation: Take up slack without bouncing or forcing the knee; stop before the shoulder is driven beyond its available range.
  • Unload first, then free the arm: Stop at a tap or verbal signal, remove the joint pressure, and release the leg clamp so the arm can move freely.

Prerequisites

What do you need before attempting Omoplata from Crackhead Control?

  • Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated.
  • Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry.
  • Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled.
  • Establish the body angle and hip control that stop the opponent from freely following the shoulder movement.

Release immediately upon tap. Injury risks ↓

Execution Steps

How do you execute Omoplata from Crackhead Control step by step?

  1. Recognize the high clinch: Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated.
  2. Release the reinforcement: Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry.
  3. Isolate one arm: Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled.
  4. Build the finishing angle: Establish the body angle and hip control that stop the opponent from freely following the shoulder movement.
  5. Load the shoulder gradually: Take up slack without bouncing or forcing the knee; stop before the shoulder is driven beyond its available range.
  6. Release the whole enclosure: Stop at a tap or verbal signal, remove the joint pressure, and release the leg clamp so the arm can move freely.

Possible Outcomes

ResultPositionProbability
Successgame-over30%
FailureCrackhead Control45%
CounterClosed Guard25%

Opponent Defenses

How might your opponent defend against Omoplata from Crackhead Control?

  • Keep the elbow close before the leg crosses into shoulder isolation. (Effectiveness: Medium) - Your Response: Keep the required control or use the stated reset; do not force the next movement. → Leads to Crackhead Control
  • Control the hip distance while the holder opens the reinforcing leg. (Effectiveness: Medium) - Your Response: Keep the required control or use the stated reset; do not force the next movement. → Leads to Crackhead Control
  • Clear the wrist before the shoulder is loaded by the new enclosure. (Effectiveness: Medium) - Your Response: Keep the required control or use the stated reset; do not force the next movement. → Leads to Closed Guard

Common Attacking Mistakes

What mistakes should you avoid when executing Omoplata from Crackhead Control?

1. Skipping recognize the high clinch

  • Consequence: The next action lacks its required control.
  • Correction: Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated.

2. Skipping release the reinforcement

  • Consequence: The next action lacks its required control.
  • Correction: Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry.

3. Skipping isolate one arm

  • Consequence: The next action lacks its required control.
  • Correction: Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled.

4. Skipping build the finishing angle

  • Consequence: The next action lacks its required control.
  • Correction: Establish the body angle and hip control that stop the opponent from freely following the shoulder movement.

5. Skipping load the shoulder gradually

  • Consequence: The next action lacks its required control.
  • Correction: Take up slack without bouncing or forcing the knee; stop before the shoulder is driven beyond its available range.

Training Progressions

How do you train Omoplata from Crackhead Control (Attacker)?

Phase 1 - Recognize the high clinch Begin as the bottom holder of the high two-leg clinch; the shoulder must still be separately isolated. Pause at this checkpoint with a cooperative partner before linking the next step.

Phase 2 - Release the reinforcement Open the reinforcing leg while retaining enough upper-body connection to organize the shoulder entry. Pause at this checkpoint with a cooperative partner before linking the next step.

Phase 3 - Isolate one arm Bring the leg into the omoplata shoulder enclosure while keeping the opponent’s wrist and upper arm controlled. Pause at this checkpoint with a cooperative partner before linking the next step.

Phase 4 - Build the finishing angle Establish the body angle and hip control that stop the opponent from freely following the shoulder movement. Pause at this checkpoint with a cooperative partner before linking the next step.